Service Parts Quantum Design

We offer an extensive range of accessories and consumables for your Quantum Design system.
To receive a quotation, just check for the right part(s) below and fill in the form.

PPMS Family
MPMS3
MPMS XL
General for all systems
General parts

Quantity

QDS-4084-002
(QD-P100)
Sample Puck Tool Kit (1x P112, 1x Puck Adjustment Tool)*

Quantity per Order: 1

Includes one Puck Extraction Tool (QD-P112) and one set of Puck Adjustment Tools (QDS-4084-106 and QDS-4084-107)

Quantity

QDS-4084-106
Puck Adjustment Fixture #1

Quantity per Order: 1

Puck adjustment tool, Inner ring

Quantity

QDS-4084-107
Puck Adjustment Fixture #2

Quantity per Order: 1

Outer ring

Quantity

QDS-4084-110
(QD-P112)
PPMS/Dynacool Puck Extraction Tool*

Quantity per Order: 1

The tool to insert and remove sample pucks in and out of the sample chamber. Compatible with PPMS and Dynacool

Quantity

QDS-4302-013
(QD-V112)
VersaLab Puck Extraction Tool***

Quantity per Order: 1

The tool to insert and remove sample pucks in and out of the sample chamber. Compatible with Versalab

Quantity

QDS-4084-100
(QD-P101)
Universal Sample Puck

Quantity per Order: 1

Blank puck without wiring. Usually used for sample chamber pin protection or for customer made experiments.

Quantity

QDS-4084-440
(QD-P111)
Vertical Sample Puck Kit

Quantity per Order: 1

Places Heat Capacity or Electrical Transport pucks in vertical orientation. Does not include measurement stages (compatible with P104, P107B or P107E). See Application Note QDS-1085-156 for details.

Quantity

QDS-8084-400
(QD-P150)
Sample Wiring Test Station

Quantity per Order: 1

The station allows testing pucks and performing test measurements outside of the sample chamber.

Quantity

QD-Pbox-L
Grey Lemo Breakout Box, standard

Quantity per Order: 1

Breakout box for all PPMS family platforms. Includes two sets (12+1) of banana connectors and two lemo (male, female) connectors for direct access to the sample chamber wiring.

Quantity

QD-Pbox-K
Grey Lemo Breakout Box, coaxial wiring

Quantity per Order: 1

Breakout box for all PPMS family platforms. Includes two sets (12+1) of coaxial connectors and two lemo (male, female) connectors for direct access to the sample chamber wiring.

Quantity

QDS-4096-272
(QD-P121)
Centering Baffle Felt Pad

Quantity per Order: 1

An essential maintenance part for the VSM/ACMSII coilsets and guide tubes. Self-adhesive

Quantity

QDS-1070-100
(QD-P160)
Set of PPMS User's Manuals

Quantity per Order: 1 set

Three bindles with hardware and options manuals

Quantity

QDS-4047-008-01
(QD-P940)
Cryogen Transfer Kit

Quantity per Order: 1 kit

Includes LHe Transfer Line (QDS-4047-009), Ultra Torr Fitting, 2 x Long Extensions, 1x Long Extension with Filter, 1 x Short Extension. Compatible with PPMS and MPMS, not for MPMS3

Quantity

QDS-4047-009
Helium Transfer Line

Quantity per Order: 1

LHe Transfer Line Only (Outer Diameter = 9.6mm), no extensions or adapters. Compatible with MPMS or PPMS, not for MPMS3.

Quantity

QDS-3084-180
Hall Sensor mounted on PCA board

Quantity per Order: 1

Sensor for verifying the magnetic field calibration. Used with P102 sample puck and DC Resistivity option. See Service Note QDS-1084-309 for details.

Quantity

QDS-4083-010
Contact Baffle Assembly

Quantity per Order: 1

"Small Cryopump" is attached to Baffle assembly and used with TTO and Heat Capacity options at low temperatures.

Quantity

QDS-4083-010
Contact Baffle Assembly 2

Quantity per Order: 1

"Small Cryopump" is attached to Baffle assembly and used with TTO and Heat Capacity options at low temperatures.

Resistivity/ETO

Quantity

QDS-4084-109
(QD-P102)
DC Resistivity/ETO Sample Puck

Quantity per Order: 1

Classical sample holder, usually called as "puck". Simple and effective way to secure and wire samples for electrical measurements. Provides 3 channels with four contacts each. The gold-plated contact pads allows either soldering or wire-bonding.

Horizontal Rotator*

Quantity

QDS-8084-371
(QD-P103A)
Rotator Resistivity Sample Boards

Quantity per Order: Set of 3

The board provides three channels for electrical measurements. Channel 1 is reserved for thermometer of the Horizontal Rotator. Each channel has 4 golden pads for contacts.

Quantity

QDS-8084-370
(QD-P103B)
Rotator ACT Sample Boards

Quantity per Order: Set of 3

The board provides three channels for 4-point electrical measurement and shows layout 5-point hall measurement. Channel 3 is reserved for thermometer of the Horizontal Rotator. Each channel has 4 golden pads for contacts.

Quantity

QDS-8084-341
(QD-P103C)
Rotator Universal Sample Boards

Quantity per Order: Set of 3

The board has 12 golden pads for electrical contacts, wired to match pins layout of the sample chamber. Usually used for customer made experiments.

Quantity

QDS-8084-342
(QD-P103D)
Rotator Field Parallel Sample Boards

Quantity per Order: Set of 2

The board allows placing samples in vertical orientation (parallel to applied field). The board has 12 golden pads for electrical contacts, wired to match pin layout of the sample chamber. Channel 1 is reserved for the horizontal rotator thermometer.

Quantity

QDS-4084-375
Rotator to Puck Interface Assembly

Quantity per Order: 1

An assembly allowing testing all Rotator Sample Boards in QD-P150 Wiring Station. Not for use at low temperatures.

He3 Option*

Quantity

QDS-4092-610
(QD-P104)
Helium-3 Res/ACT/ETO Sample Mount

Quantity per Order: 1

Provides two 4-contact channels for electrical measurements in He3 temperature range.

Quantity

QDS-4092-621
(QD-P107E)
Helium-3 Heat Capacity Micro-calorimeter Sample Puck

Quantity per Order: 1

Heat Capacity puck designed for use with He3 Option. Uncalibrated.

DR Option*

Quantity

QDS-4091-610
(QD-P105)
Dilution Refrigerator User Sample Mount

Quantity per Order: 1

Provides two 4-contact channels for electrical measurements in DR temperature range. Made of gold coated silver, one edge is sanded to show this.

Quantity

QDS-4085-280
(QD-P107H)
3D DR Heat Capacity Puck

Quantity per Order: 1

Dynacool DR Heat Capacity. Not compatible with PPMS, uncalibrated.

Quantity

QDS-4085-264
(QD-P107J)
2D DR Heat Capacity Puck

Quantity per Order: 1

PPMS DR Heat Capacity Puck. Not compatible Dynacool, uncalibrated

ACT Option**

Quantity

QDS-4084-509
(QD-P106)
ACT Sample Puck

Quantity per Order: 1

The puck provides two channels with 5 contacts each, designed and wired for use with ACT Option. The gold-plated contact pads allows either soldering or wire-bonding.

Heat Capacity Option

Quantity

QDS-4085-210
(QD-P107A)
Heat Capacity Micro-calorimeter Sample Puck

Quantity per Order: 1

Standard puck for Heat Capacity option. Uncalibrated.

Quantity

QDS-4085-216
(QD-P107B)
Heat Capacity Micro-calorimeter Sample Frame

Quantity per Order: 1

Can be used as spare/replacement for QD-P107A or as individual sample stage with Vertical Puck (QD-P111). Uncalibrated.

Torque Magnetometer Option

Quantity

QDS-4084-363
(QD-P108)
Torque Magnetometer Holder Board

Quantity per Order: Set of 2

Board designed for use with TQ Chip

Quantity

QDS-8084-369
(QD-P109A)
Standard Torque Magnetometer Chip

Quantity per Order: 1

The chip has two legs, max applied torque is ~1e-5 N-m. Uncalibrated

Quantity

QDS-8084-368
(QD-P109B)
Large Moment Torque Magnetometer Chip

Quantity per Order: 1

The chip has three legs, max applied torque ~1e-4 N-m. Uncalibrated

Quantity

QDS-8084-369-01
(QD-P110A)
Calibrated QD-P109A Torque Magnetometer Chip

Quantity per Order: 1

The chip has two legs, max applied torque is ~1e-5 N-m. Calibrated at QD.

Quantity

QDS-8084-368-01
(QD-P110B)
Calibrated QD-P109B Torque Magnetometer Chip

Quantity per Order: 1

The chip has three legs, max applied torque ~1e-4 N-m. Calibrated at QD.

TTO Option

Quantity

QDS-4084-570
(QD-P117A)
Thermal Transport Sample Puck

Quantity per Order: 1

TTO puck only, without Thermometers and Heater shoe assemblies.

Quantity

QDS-4084-616
(QD-P117B)
Set of Thermal Transport Shoes (2x QD-P117C and 1x QD-P117D)

Quantity per Order: 1

The set Includes two Thermometers and one Heater shoes for use with TTO puck. Uncalibrated.

Quantity

QDS-4084-580
(QD-P117C)
Thermal Transport Thermometer Shoe Assembly

Quantity per Order: 1

Spare Thermometer Shoe Assembly for use with TTO puck. Uncalibrated.

Quantity

QDS-4084-585
(QD-P117D)
Thermal Transport Heater Shoe Assembly

Quantity per Order: 1

Spare Heaer Shoe Assembly for use with TTO puck. Uncalibrted

Quantity

QDS-4084-609
(QD-P117E)
Sample Lead Discs

Quantity per Order: Set of 30

The Disks with two leads are made of gold-plated OFHC copper and allow an easy way for attaching thermal leads in 2-point configuration. Disc diameter is 6.3mm, the leads lengh is 0.5mm and width 0.6mm, thickness 0.25mm.

Quantity

QDS-4084-610
(QD-P117F)
Sample Lead Bars

Quantity per Order: Set of 10

The Leads are made of gold-plated OFHC copper and used for attaching thermal leads in traditional 4-point as well as 2-point configuration. Length is 152mm, width is 0.6mm, thickness is 0.25mm.

Quantity

QDS-4084-581
(QD-P118)
Thermal Transport Nernst Effect Measurement Shoe

Quantity per Order: 1

TTO thermometer shoe with voltage lead free instead of soldered to the shoe body. Designed for accomodating Nernst-Ettingshausen measurements with TTO Option.

Quantity

QDS-4084-608
Cu Sample for TTO Shoes calibration

Quantity per Order: Set of 2

The copper sample is cut in the shape allowing convenient way for attaching TTO shoes for their calibration.

Quantity

QDS-4084-611
Ni Standard Sample Assembly

Quantity per Order: Set of 2

The commercially pure nickel 201 sample is cut in the shape allowing convenient way for attaching TTO shoes for test measurements and caliblration verification.

VSM Option

Quantity

QDS-4096-204
(QD-P120A)
6.3 mm Bore VSM Coil Set

Quantity per Order: 1

Standard VSM coilset. Requires standard Sample Rod and Guide tube (P526A & P526D for PPMS/Dynacool or V536A & V536B for Versalab).

Quantity

QDS-4096-391
(QD-P125A)
VSM Brass Half-tube Sample Holder

Quantity per Order: 1

Robust samle holder, has 3.5mm inner diameter, 4mm outer diameter and ca. 91 mm length. Can be combined with P125E VSM Powder Sample Holders or with QDS-4096-399 Quartz Braces. Not compatible with MPMS3.

Quantity

QDS-4096-392
(QD-P125B)
VSM Quartz Sample Holder

Quantity per Order: 1

Magnetically clean quartz holder, ideal for samples with small moments. The holder geometry allows placing the samples close to the geometrical center of pickup coil. Flat surfact is 4 mm wide, length is ca 91mm.

Quantity

QDS-4096-388
(QD-P125E)
VSM Powder Sample Holder

Quantity per Order: Set of 50 pairs

Sample holder for powder samples. A pair of parts is assembled together to press the powder sample in a piston-cylinder fashion. Made of polypropylene. For use with brass sample holder QD-P125A.

Quantity

QDS-4096-399
Quartz Rod Sample Brace

Quantity per Order: 1

The quartz braces/cylinders allow mounting a sample perpendicular to the magnetic fiels. For use with brass sample holder QD-P125A or C130B Brass Sample Holders.

Quantity

QDS-4096-396
Quartz Shim

Quantity per Order: 1

The shims allow mounting a sample perpendicular to the magnetic field. For use with P125B or C130A Quartz Sample Holders.

Quantity

QDS-4096-352
(QD-P526A)
PPMS/Dynacool VSM Sample Rod Assembly*

Quantity per Order: 1

Standard Sample Rod made of carbon fiber. Diameter of blue bearing = 7.6 mm. Compatible with PPMS/Dynacool Standard VSM and ACSMII options.

Quantity

QDS-4096-301
(QD-P526D)
PPMS/Dynacool VSM Guide Tube*

Quantity per Order: 1

Guide tube with inner diameter 7.6 mm. Compatible with PPMS/Dynacool Standard VSM and ACMSII options.

Quantity

QDS-4096-275
(QD-V536A)
VersaLab VSM Sample Rod***

Quantity per Order: 1

Standard Sample Rod made of carbon fiber. Diameter of blue bearing = 7.6 mm. Compatible with Versalab Standard VSM and ACMSII options.

Quantity

QDS-4096-350
(QD-V536B)
VersaLab VSM Guide Tube***

Quantity per Order: 1

Guide tube with inner diameter 7.6 mm. Compatible with Versalab Standard VSM and ACMSII options.

Quantity

QDS-4096-050
VSM Sample Mounting Station

Quantity per Order: 1

Station for mounting samples at at 35mm mark, for use with Standard and Large Bore VSM Option.

Quantity

QDS-4041-002
(QD-C210A)
Palladium Reference Sample, not mounted

Quantity per Order: 1

Pd reference sample, not mounted. The sample has 99.99% purity, L=3.81mm, D=2.7mm, defined mass ans magnetic susseptibilty (see Certificate QDS-1041-001 for details).

Quantity

QDS-4096-390
VSM Pd Calibration Sample

Quantity per Order: 1

For The Pd reference sample (QD-C210A) mounted in brass sample holder and used for VSM calibration and verification.

Quantity

QDS-4096-358
Magnetic Lock for Sample Rod

Quantity per Order: 1

Removable upper part with intergrated 6 magnets for perfect positioning and good attachement of the Sample Rod to VSM Transport. Compatible with all PPMS Family VSM/ACMSII and MPMS3 sample rods.

Quantity

QDS-4096-366
VSM Sample Rod Flexture

Quantity per Order: 1

The flexture is designed to be a multi-function aligner and resonance attenuator. Compatible with PPMS Family VSM/ACMSII as well as with MPMS3 Sample Rods.

Quantity

QDS-4096-368
Lower Centering Washer

Quantity per Order: 1

Lower Slide and Centering Adapter for Standard VSM/ACMSII Sample Rod, d=7.6mm.

VSM Large Bore Option

Quantity

QDS-4096-600
(QD-P120B)
12.0 mm Large Bore VSM Coil Set

Quantity per Order: 1

VSM coilset with enlarged bore. Requires Large Bore Sample Rod and Guide tube (P526B & P526E for PPMS/Dynacool or V536C & V536D for Versalab).

Quantity

QDS-4096-630
(QD-P125C)
VSM Large Bore Brass Half-tube Sample Holder

Quantity per Order: 1

Robust sample holder with 5.5mm inner diameter. For use with Large Bore VSM coilset only.

Quantity

QDS-4096-635
(QD-P125D)
VSM Large Bore Aluminium Paddle Sample Holder

Quantity per Order: 1

Sample Holder optimized for thin film or flat samples, sample can be secured without glue using small teflon screw.

Quantity

QDS-4096-610
(QD-P526B)
PPMS/Dynacool VSM LBC Sample Rod*

Quantity per Order: 1

Large Bore Sample Rod, diameter of blue bearings = 10.3mm. For use with PPMS/Dynacool LB VSM Option.

Quantity

QDS-4096-620
(QD-P526E)
PPMS/Dynacool VSM LBC Guide Tube*

Quantity per Order: 1

Guide tube with inner diameter 10.3mm. Compatible with PPMS/Dynacool LB VSM Option.

Quantity

QDS-4096-276
(QD-V536C)
VersaLab VSM LBC Sample Rod***

Quantity per Order: 1

Large Bore Sample Rod, diameter of blue bearings = 10.3mm. For use with Versalab LB VSM option.

Quantity

QDS-4096-675
(QD-V536D)
VersaLab VSM LBC Guide Tube***

Quantity per Order: 1

Guide tube with inner diameter 10.3mm. Compatible with Versalab LB VSM Option.

Quantity

QDS-4096-612
LBC Lower Centering Washer

Quantity per Order: 1

Lower Slide and Centering Adapter for Large Bore VSM Sample Rod, d=10.3mm.

VSM Oven Option

Quantity

QDS-4097-050
(QD-P127A)
VSM Oven Heater Stick

Quantity per Order: 1

This heater stick is a high-end sample holder with lithographed heater and thermometer, which allows for magnetic measurements up to 1000 K. Surface is 5mm wide. Sample are usually mounted using QDS-4097-030 Zircar Cement and QDS-4505-141 Copper Foil.

Quantity

QDS-4097-039
(QD-P127B)
VSM Oven Copper Foil Coupons

Quantity per Order: Set of 10

Annealed copper foil, 12mm x 30mm. The foil is used to wrap around sample installed on the QD-P127A Heater Stick, providing a good isothermal region and minimizing magnetic dipole sources due to the foil's homogeneity.

Quantity

QDS-4097-002
(QD-P540)
VSM Oven Dry Mount Kit

Quantity per Order: 1

For use with samples that are affected by the moisture in water-based Zircar cement. Includes 3x dry mount plates, 10x staples and 10x copper foil coupons.

Quantity

QDS-4097-041
VSM Oven Sample Mounting Station

Quantity per Order: 1

Station for mounting samples at at 35mm mark, specifically designed for use with VSM Oven Option.

Quantity

QDS-4097-010
(QD-P528)
VSM Oven Sample Rod Assembly*

Quantity per Order: 1

Sample rod made of carbon fiber with feed-through wires, used with QDS-P127A VSM Oven Heater Stick. Compatible with PPMS/Dynacool.

Quantity

QDS-4097-075
(QD-V532)
VersaLab VSM Oven Sample Rod***

Quantity per Order: 1

Sample rod made of carbon fiber with feed-through wires, used with P127A VSM Oven Heater Stick. Compatible with Versalab.

ACMS II Option

Quantity

QDS-4084-814
(QD-P506)
ACMS II straw adapter assembly

Quantity per Order: 1

Adapter allowing using straws with ACMSII and MPMS3 Sample Rods.

Quantity

QDS-4084-811
ACMS II Sample Mounting Station

Quantity per Order: 1

Station for mounting samples at 25mm mark. For use with ACMSII Option.

Quantity

QDS-4084-830
ACMSII Quartz GGG Standard Assy

Quantity per Order: 1

GGG reference sample (P507) mounted in quartz tube sample holder. For use with ACMSII Option

Quantity

QDS-YC3091
(QD-P507)
GGG AC standard reference sample (cylinder), not mounted

Quantity per Order: 1

AC standard reference sample (GGG), not mounted. Has same shape and size as Pd sample.

ACMS Option**

Quantity

QDS-4084-230
(QD-P501A)
ACMS Sample Rod

Quantity per Order: 1

Quantity

QDS-4084-240
(QD-P502)
ACMS Sample rod short extension and cup/holder

Quantity per Order: 1

Quantity

QDS-4084-245
(QD-P503)
ACMS Sealed Sample holder assembly

Quantity per Order: 1

Sealed bucket for liquid or air sensitive samples

Quantity

QDS-4084-241
(QD-P504)
ACMS Sealed sample cup

Quantity per Order: 1

Cup only

Quantity

QDS-4084-234
ACMS Straw Adapter

Quantity per Order: 1

Quantity

QDS-4084-245
ACMS Sealed Short Sample Rod Assy

Quantity per Order: 1

* PPMS/Dynacool only, not Versalab Compatible
** Obsolete, PPMS only, not Dynacoo/Versalab compatible
*** Versalab only, not PPMS/Dynacool Compatible

Request a quotation

To receive a quotation by email, please fill in your data below.

* Required fields
Folgen sie uns: twitter linkedin facebook
European offices
© LOT Quantum Design 2016